How do I refill my PRINCE X TOPDRAWER Dolphin Lighter?Updated 5 months ago

### Steps to Refill a Japanese Lighter

1. **Preparation**: Ensure you are working in a well-ventilated area away from any open flames or sources of ignition. It's advisable to wear gloves and safety goggles for protection.

2. **Release Pressure**: Before you begin, release any remaining gas pressure in the lighter. This can be done by pressing down on the lighter's nozzle for a brief moment, away from your face and body.

3. **Position the Lighter and Gas Cylinder**: Hold the lighter upside down with one hand. With your other hand, take the gas cylinder and position it so that its nozzle (or stem) is aligned perpendicular to the gas inlet of the lighter.

4. **Refill with Fuel**: Firmly press the gas cylinder down onto the lighter's inlet. Maintain this pressure for 2-3 seconds. If necessary, repeat this process once or twice until the lighter feels fully refilled. You may notice a slight overflow of gas, indicating that the lighter is full.

5. **Check for Leaks**: After refilling, inspect the lighter for any leaks or hissing sounds. If you detect a leak, do not use the lighter until it has been checked and repaired.

6. **Wait Before Use**: Allow a few minutes for any excess gas to dissipate before attempting to use the lighter. This will ensure safety when you ignite it.

7. **Store Safely**: Once refilled, store the lighter in a cool, dry place away from direct sunlight and heat sources.

Following these steps will help you refill your Japanese lighter safely and effectively!