Helpful tips to resolve skipping issues while writing.Updated 5 months ago

If you're experiencing issues with your fountain pen, the following solutions may help improve ink flow and overall performance.

## Option 1: Flush the Pen

Sometimes, new pens can have residual oils or debris from manufacturing that may block ink flow. This flushing method can help to clear any obstructions.

### Materials Needed:

- Lukewarm water

- Paper towels

### Steps:

1. **Disassemble**: Carefully remove the ink cartridge from the pen barrel.

2. **Flush with Water**: Hold the nib and feed under a gentle stream of lukewarm water for about 60 seconds, or until the water runs clear.

3. **Dry**: Shake the nib gently to remove excess water, then place it on a paper towel to air dry for several hours or overnight before reassembling and inserting ink.

---

## Option 2: Adjust Your Writing Angle and Pressure

Fountain pens perform best when held at a specific angle and with a light touch. Here’s how to adjust your writing technique for optimal results.

### Steps:

1. **Lighten Your Grip**: Hold the pen gently; the ink should flow naturally without excessive force.

2. **Find the "Sweet Spot"**: The ideal holding angle for most fountain pens is between 40 and 55 degrees relative to the paper. Start with a comfortable angle and slightly adjust until both nib tines make even contact with the paper for a smooth line.

3. **Avoid Pressure**: Pressing down too hard can spread the nib tines apart, hindering ink flow and potentially damaging the pen. Allow the pen's weight to do the work for you!

---

If you have further questions or need additional assistance, please don't hesitate to reach out to our support team!